Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Alcatel-Lucent 4A0-M01, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Alcatel-Lucent 4A0-M01.
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Alcatel-Lucent 4A0-M01, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Le test Alcatel-Lucent 4A0-M01 est l'un très improtant dans tous les tests de Certification Alcatel-Lucent, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Est-ce que vous vous souciez encore pour passer le test Alcatel-Lucent 4A0-M01? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Alcatel-Lucent 4A0-M01, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Alcatel-Lucent 4A0-M01. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.
Code d'Examen: 4A0-M01
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)
Questions et réponses: 150 Q&As
4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html
NO.1 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A
Alcatel-Lucent 4A0-M01 examen 4A0-M01
NO.2 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A
Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01 4A0-M01 examen
NO.3 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A
Alcatel-Lucent 4A0-M01 examen 4A0-M01 examen
NO.4 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A
Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01 4A0-M01 certification 4A0-M01
NO.5 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B
certification Alcatel-Lucent 4A0-M01 4A0-M01 examen
NO.6 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B
Alcatel-Lucent examen 4A0-M01 4A0-M01 certification 4A0-M01 4A0-M01
NO.7 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B
Alcatel-Lucent examen certification 4A0-M01 certification 4A0-M01 4A0-M01
NO.8 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01 examen 4A0-M01
NO.9 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A
Alcatel-Lucent 4A0-M01 examen 4A0-M01 examen 4A0-M01
NO.10 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C
Alcatel-Lucent 4A0-M01 examen 4A0-M01
NO.11 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C
certification Alcatel-Lucent 4A0-M01 examen 4A0-M01 4A0-M01 examen
NO.12 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B
Alcatel-Lucent examen 4A0-M01 4A0-M01
NO.13 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D
Alcatel-Lucent examen certification 4A0-M01 4A0-M01
NO.14 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01 certification 4A0-M01
NO.15 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B
Alcatel-Lucent 4A0-M01 examen 4A0-M01 examen 4A0-M01 4A0-M01
NO.16 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B
certification Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01
NO.17 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B
certification Alcatel-Lucent 4A0-M01 4A0-M01 examen 4A0-M01 examen
NO.18 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A
certification Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01 4A0-M01
NO.19 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C
certification Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01 4A0-M01
NO.20 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B
Alcatel-Lucent examen 4A0-M01 certification 4A0-M01
Vous aurez une assurance 100% à réussir le test Alcatel-Lucent 4A0-M01 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.
没有评论:
发表评论