En quelques années, le test de certification de Juniper JN0-692 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Juniper JN0-692? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification JN0-692. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification JN0-692, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Juniper JN0-692 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Juniper JN0-692.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Juniper JN0-692.
Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Juniper JN0-692 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Juniper JN0-692.
Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Juniper JN0-692. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Juniper JN0-692, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
Code d'Examen: JN0-692
Nom d'Examen: Juniper (Service Provider Routing and Switching Support, Professional)
Questions et réponses: 171 Q&As
Est-que vous s'inquiétez encore à passer le test Certification JN0-692 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Juniper JN0-692? Si vous voulez réussir le test Juniper JN0-692 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
JN0-692 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-692.html
NO.1 You are asked to retain several routes from an external BGP neighbor in the routing table on
your local router, but you are not allowed to forward traffic to these destinations. You have
configured a forwarding table firewall filter to block these routes, and applied it under the (edit
forwarding-options] hierarchy, but the routes are still showing up in the forwarding table. What is
required to achieve this task?
A. Configure an EBGP import policy on your local router to block the routes.
B. Have the EBGP neighbor configure an export policy to block the routes.
C. Configure an export policy for the forwarding table to block the routes.
D. Use the no-install configuration statement within the EBGP neighbor group on your local router.
Answer: C
Juniper JN0-692 JN0-692
NO.2 You have recently implemented a new Layer 2 VPN and it is not establishing. The show I2vpn
connections command displays an out-of-range state.
What is causing this problem?
A. The local site ID value is too high for the label block.
B. The VRF target community values do not match between sites.
C. The VRF route distinguisher values do not match between sites.
D. The local site ID is not defined.
Answer: A
certification Juniper JN0-692 examen JN0-692 JN0-692
NO.3 An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two
causes? (Choose two.)
A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.
Answer: C,D
certification Juniper JN0-692 JN0-692
NO.4 You recently added your autonomous system to an existing BGP confederation. You notice that
a route that had a local preference of 100 now has a local preference of 50. Which statement
explains the change?
A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a
single AS but are allowed to propagate throughout the confederation's AS members.
B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or
below.
C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in
question; the local preference reverted to 50 once the BGP peering established.
D. The route is being shared through an EBGP peer, and the confederation is propagating the local
preference from the peer.
Answer: A
certification Juniper certification JN0-692 JN0-692 examen JN0-692
NO.5 Your currently configured regular expression does not match the AS path shown below:
2135.55 55 55 55 3796
Which three regular expressions would match this path? (Choose three.)
A. "."2135"
B. "2135.*"
C. "* 55(1, 3) *"
D. "2135 55(5) 3796"
E. "2135 55(1, 2) 3796"
Answer: B,C,E
Juniper JN0-692 examen certification JN0-692
NO.6 Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?
A. Type 3
B. Type 5
C. Type 7
D. Type 9
Answer: C
certification Juniper JN0-692 examen JN0-692 examen JN0-692 examen JN0-692
NO.7 You have recently added LDP-signaled VPLS to your network. The VPLS connections are
established and you have been asked to verify that the forwarding plane is working properly. Which
three commands would you use? (Choose three.)
A. ping mpls Idp <fec>
B. show vpls connections
C. traceroute mpls Idp <fec>
D. show vpls mac-table
E. show Idp statistics
Answer: A,C,D
certification Juniper certification JN0-692 JN0-692
10. R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.
Which two reasons would account for this happening? (Choose two.)
A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area
Answer: B,D
certification Juniper certification JN0-692 JN0-692 JN0-692 examen certification JN0-692
NO.8 One of your router's OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)
A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.
Answer: A,C,E
Juniper examen JN0-692 examen JN0-692 certification JN0-692
NO.9 You have applied a customized EXP rewrite rule on router R1 on the egress of the interface
connecting to router R2. You want to verify if it is working properly. Which two methods would you
use to accomplish this task? (Choose two.)
A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets
for the new EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets
coming from R1.
Answer: C,D
certification Juniper JN0-692 examen JN0-692
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test JN0-692 est lequel très important dans les tests de Certification Juniper. Pour être qualifié de Juniper, on doit obtenir le passport de test Juniper JN0-692.
没有评论:
发表评论