Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Symantec ASC-093, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Symantec ASC-093 coûtant un peu d'argent.
Il y a plusieurs de façons pour réussir le test Symantec ST0-91W, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Symantec ASC-094, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Symantec ASC-094.
Le test certification Symantec ST0-91W est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Symantec ST0-91W puisse augmenter la compétition dans ce marché.
Code d'Examen: ASC-093
Nom d'Examen: Symantec (ASC Data Loss Prevention 2010)
Questions et réponses: 70 Q&As
Code d'Examen: ST0-91W
Nom d'Examen: Symantec (Symantec NetBackup 7.0 for Windows(STS))
Questions et réponses: 250 Q&As
Code d'Examen: ASC-094
Nom d'Examen: Symantec (ASC Storage Management Assessment)
Questions et réponses: 77 Q&As
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Symantec ASC-093. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
ASC-094 Démo gratuit à télécharger: http://www.pass4test.fr/ASC-094.html
NO.1 Which two capabilities of Symantec Common Product Installer (CPI) are not supported by the
web-based installer for Storage Foundation 5.1? (Select two.)
A. installing Storage Foundation
B. uninstalling Storage Foundation
C. upgrading Storage Foundation
D. configuring Storage Foundation for Oracle RAC (SFRAC)
E. adding license keys for Storage Foundation
Answer: C, D
certification Symantec ASC-094 examen ASC-094 examen ASC-094 examen ASC-094 ASC-094 examen
NO.2 What are the limitations when upgrading CVM and CFS to version 5.1?
A. All systems within a CVM/CFS configuration must have the same versions of software; rolling upgrades
with mixed versions of software are only supported from 5.1 onwards.
B. All systems within a CVM/CFS configuration must have the latest MP for the current version prior to the
upgrade to 5.1.
C. Rolling upgrades can only be performed from version 5.0 to 5.1; rolling upgrades from 4.1 are not
supported
D. Rolling upgrades can only be performed if the diskgroup and filesystem versions remain unchanged
until all of the systems have been upgraded to the same version of software
Answer: A
Symantec examen ASC-094 ASC-094 ASC-094 examen ASC-094 ASC-094 examen
NO.3 A customer has two identical servers that support an OLTP database and billing application, respectively.
Each night they run a batch job to create a full Volume Manager snapshot of their OLTP database, which
is then imported and mounted on the other server to support the billing application. The customer has
asked an administrator to upgrade the version of Storage Foundation on the OLTP server to version 5.1.
Which action should be taken when performing this upgrade?
A. Upgrade the Storage Foundation binaries, diskgroups, and filesystems on the OLTP server and advise
the customer to upgrade their billing system to the same version of Storage Foundation software.
B. Inform the customer that they must upgrade the OLTP and Billing servers at the same time.
C. Modify the Storage Foundation configuration to use space-saving snapshots instead of full snapshots.
D. Only upgrade the Storage Foundation binaries on the OLTP server, do not upgrade the diskgroup and
filesystem versions until after the Billing server has been upgraded.
Answer: D
Symantec examen certification ASC-094 certification ASC-094
NO.4 In which order must the tasks be performed to initially synchronize VVR replication using
checkpoints? .
Start replication using vradmin -c checkpoint startrep . Run "vxrvg -c checkpoint
checkstart" . Run "vxrvg checkend" . Perform a block-level backup at the primary . Restore raw backup at
the secondary
A. 1, 4, 5, 3, 2
B. 2, 1, 4, 5, 3
C. 2, 4, 3, 5, 1
D. 2, 4, 5, 3, 1
Answer: C
certification Symantec ASC-094 examen certification ASC-094
NO.5 A customer has a Veritas Volume Replicator (VVR) configuration with srlprot attribute set to autodcm. In
the event that the SRL overflows, what will happen?
A. VVR will delay any further writes to the primary node until the SRL has drained below the
low-watermark threshold
B. VVR tracks new writes in the DCM while it drains the SRL. Once the SRL is empty, VVR then
automatically replicates writes tracked by the DCM.
C. VVR tracks new writes in the DCM while it drains the SRL. Once the SRL is empty, VVR stops and the
DCM must be replayed manually.
D. VVR stops replicating and writes in the SRL are converted into DCM logging. The DCM must then be
replayed manually.
Answer: D
Symantec examen ASC-094 examen ASC-094 ASC-094 examen
NO.6 A customer has Veritas Volume Replication (VVR) version 5.1 with the following Rlink attributes:
synchronous=override bandwidth_limit=30 mbps Which statement is true?
A. If VVR is unable to maintain synchronous replication within the defined bandwidth limits, then the
bandwidth_limit attribute will be overridden to try and maintain a synchronous copy of the data at the
secondary site.
B. If VVR is unable to maintain synchronous replication within the defined bandwidth limits, it will
automatically fall-back to asynchronous mode to enable replication within the defined bandwidth limits.
C. VVR will throttle the write operations on the primary server in order to replicate the data
synchronously to the secondary site within the bandwidth limits. In the event of a network failure VVR will
fallback to asynchronous replication mode and the write operations on the primary server will no longer be
throttled, but the bandwidth for replicating to the secondary site will still be limited.
D. The bandwidth_limit attribute does not apply to synchronous replication, however in the event that the
rLink falls back to asynchronous mode the data will then be replicated within the defined bandwidth limits.
Answer: C
Symantec examen certification ASC-094 ASC-094 ASC-094 examen certification ASC-094
NO.7 You have been asked to review a customer's VVR configuration, and found that the Rlink has the
following attributes: srlprot=override bandwidth_limit=30 mbps What is the risk to the customer's
application if the SRL overflows?
A. Application writes will be stalled which may cause the front-end application to fail or hang.
B. The bandwidth_limit will be increased so the SRL can drain, and this may overload the network and
cause application performance problems.
C. The size of the SRL will be increased, leaving less space if the application volumes need to be
extended.
D. VVR will start to use the DCM, which requires a replay of the DCM, during which, Write Order Fidelity
for the application data is lost.
Answer: A
Symantec certification ASC-094 certification ASC-094 ASC-094 examen
NO.8 A customer has a Veritas Volume Replicator (VVR) configuration with the srlprot attribute set to override.
If there is an SRL overflow while the RLINK is connected, what happens to the running application issuing
writes.?
A. Application continues, and VVR overflows the SRL.
B. Application is blocked until SRL drains 5% or 20 megabytes, whichever is smaller.
C. Application is blocked until the RLINK is automatically detached after AutoDetach seconds have
elapsed.
D. Application continues, and VVR is automatically converted to DCM logging.
Answer: B
certification Symantec ASC-094 ASC-094 certification ASC-094 ASC-094 examen ASC-094
没有评论:
发表评论