C'est pas facile à passer le test Certification Symantec ST0-250, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Symantec ST0-250 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Symantec ST0-250, vous allez passer le test Symantec ST0-250 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.
Votre vie changera beaucoup après d'obtenir le Certificat de Symantec 250-407. Tout va améliorer, la vie, le boulot, etc. Après tout, Symantec 250-407 est un test très important dans la série de test Certification Symantec. Mais c'est pas facile à réussir le test Symantec 250-407.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Symantec ST0-250, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Symantec ST0-250 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Symantec ST0-250 sans aucune doute.
Code d'Examen: ST0-250
Nom d'Examen: Symantec (Symantec Messaging Gateway 10.5 Technical Assessment)
Questions et réponses: 126 Q&As
Code d'Examen: 250-407
Nom d'Examen: Symantec (Administration of Altiris Client Management Suite 7.1 / 7.x)
Questions et réponses: 133 Q&As
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Symantec 250-407.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Symantec 250-407. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Symantec ST0-250. La ressourece providée par Pass4Test peut juste s'accorder votre demande.
ST0-250 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-250.html
NO.1 How does Symantec DLP communicate with Symantec Messaging Gateway (SMG) to indicate
what type of incident (if any) is related to a given message?
A. Symantec DLP uses the ICAP protocol to indicate if a message is clean,or if it violated any defined
policies.
B. Symantec DLP will add information into the message that can be interpreted by SMG and then
send it to SMG via SMTP .
C. Symantec DLP will quarantine messages that violate established policies,blocking it from SMG.
D. Symantec DLP will use TLS to send a notification message to the SMG server for any content
violations.
Answer: B
certification Symantec certification ST0-250 ST0-250 examen certification ST0-250
NO.2 Symantec Messaging Gateway 10.5 will be deployed to receive mail directly from the Internet.
In this situation, which option should be selected within the Inbound Mail Filtering - Accepted Hosts
step of the site setup wizard?
A. Enable MX lookup
B. Define a list of domains
C. Specify IP addresses/domains
D. Select all IP addresses
Answer: D
certification Symantec ST0-250 examen ST0-250 examen certification ST0-250 ST0-250 examen
NO.3 An administrator needs to determine whether a sending MTA is being throttled by Symantec
Messaging Gateway 10.5. Where is this information located?
A. Reputation Summary report
B. IP reputation lookup table
C. SMTP server logs
D. message audit logs
Answer: B
Symantec examen ST0-250 examen certification ST0-250 ST0-250 examen ST0-250
6. After a configurable period of time, a suspect virus is released from the Suspect Virus
Quarantine. What happens to it next?
A. An alert is sent to the email administrator.
B. The attachment is removed and the original message is delivered to the recipient.
C. It is rescanned.
D. It is moved to quarantine.
Answer: C
certification Symantec ST0-250 ST0-250 examen ST0-250
7. What is the current name of the LDAP synchronization technology used within the Symantec
Messaging Gateway?
A. Dynamic Data Cache
B. Directory Data Service
C. Active Directory
D. Domain Controller Interface (DCInterface)
Answer: B
Symantec examen ST0-250 certification ST0-250 ST0-250 examen
8. If recipient validation is configured properly, which SMTP response level is given to messages
that fail recipient validation queries at connect time?
A. 3xx - Service unavailable
B. 4xx - Temporary delivery failure
C. 5xx - Permanent delivery failure
D. 6xx - Rejected validation failure
Answer: C
Symantec examen ST0-250 examen certification ST0-250 certification ST0-250
9. How should an administrator stop inbound mail using the command line interface (CLI)?
A. use mta-control
B. use mta-stop
C. use mail-control
D. use mail-stop
Answer: A
certification Symantec ST0-250 examen certification ST0-250 certification ST0-250
10. Which additional Email Reports Data collection must be enabled to track Top Probe Accounts
via reports?
A. Spam and Unwanted Mail
B. Submissions
C. Sender IP connections
D. Invalid Recipients
Answer: D
certification Symantec certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250
11. Which two statistics can the administrator view regarding the custom anti-spam rulesets?
(Select two.)
A. the "top-submitters" of missed spam or false positive detections
B. the "top submitters" of messages that are not valid and did not generate a custom rule
C. how many emails have been submitted for custom antispam rules
D. the effectiveness of the custom antispam rulesets compared to Symantec's rulesets
E. the top senders of messages detected by custon antispam rulesets
Answer: A,C
Symantec examen certification ST0-250 certification ST0-250 certification ST0-250
12. What two actions can allowed end-users do to submit samples to Symantec and have custom
anti-spam rules created? (Select two.)
A. submit a sample to Symantec using the Email Submission Client
B. flag messages in their web-based SMG quarantine page as being spam and submitting the results
C. forward spam samples to abuse@symantec.com with a subject of "MISSED SPAM"
D. move the message into the included "Junk E-mail" folder available in Outlook
E. submit a sample to Symantec using the Email Submission Client available for Lotus Domino
Answer: A,B
Symantec certification ST0-250 ST0-250 ST0-250
13. A company uses multiple control centers. What must be done to ensure legitimate NDRs are
recognized by Bounce Attack Prevention across all scanners?
A. configure the same seed value on each control center
B. configure the same administrator email address across both control centers
C. configure the same seed value on each scanner
D. configure both control centers with the same internal email hosts
Answer: A
Symantec examen ST0-250 ST0-250 examen ST0-250 ST0-250 examen
14. An organization would like to participate in the Symantec Probe Network without having to
manually create decoy email accounts. The organization wants to make sure that the addresses that
participate in the Symantec Probe Network are currently receiving email. Which directory data
source function should be enabled to help in this situation?
A. recipient validation
B. address resolution
C. SMTP authentication
D. LDAP routing
Answer: A
certification Symantec ST0-250 examen ST0-250
15. What is required before attempting installation of the Symantec Messaging Gateway 10.5
appliance?
A. console access to the appliance
B. DVD-ROM drive listed on hardware compatibility list
C. valid license file
D. machine account created in Active Directory
Answer: A
Symantec ST0-250 ST0-250 examen
NO.4 What should an administrator do before performing a software update of Symantec
Messaging Gateway 10.5?
A. Store backup on local server
B. Store backup on a remote location using FTP
C. Encrypt local backup
D. Purge all backups from the appliance
Answer: C
Symantec examen ST0-250 examen ST0-250 ST0-250
NO.5 Which directory data source function must be enabled to help prevent a directory harvest
attack?
A. Active Directory connector
B. Dynamic Data Sourcing
C. LDAP authentication
D. Recipient validation
Answer: D
Symantec examen certification ST0-250 ST0-250 examen ST0-250 examen
没有评论:
发表评论