On doit faire un bon choix pour passer le test Symantec 250-405. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Symantec 250-405 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Certification Symantec ST0-250 est un des tests plus importants dans le système de Certification Symantec. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Symantec ST0-250 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Symantec 250-407 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.
Code d'Examen: 250-405
Nom d'Examen: Symantec (Administration of Symantec Management Platform 7.5)
Questions et réponses: 200 Q&As
Code d'Examen: ST0-250
Nom d'Examen: Symantec (Symantec Messaging Gateway 10.5 Technical Assessment)
Questions et réponses: 126 Q&As
Code d'Examen: 250-407
Nom d'Examen: Symantec (Administration of Altiris Client Management Suite 7.1 / 7.x)
Questions et réponses: 133 Q&As
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Symantec ST0-250.
ST0-250 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-250.html
NO.1 What should an administrator do before performing a software update of Symantec
Messaging Gateway 10.5?
A. Store backup on local server
B. Store backup on a remote location using FTP
C. Encrypt local backup
D. Purge all backups from the appliance
Answer: C
certification Symantec certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250 ST0-250
NO.2 An administrator needs to determine whether a sending MTA is being throttled by Symantec
Messaging Gateway 10.5. Where is this information located?
A. Reputation Summary report
B. IP reputation lookup table
C. SMTP server logs
D. message audit logs
Answer: B
certification Symantec certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250
6. After a configurable period of time, a suspect virus is released from the Suspect Virus
Quarantine. What happens to it next?
A. An alert is sent to the email administrator.
B. The attachment is removed and the original message is delivered to the recipient.
C. It is rescanned.
D. It is moved to quarantine.
Answer: C
Symantec examen ST0-250 ST0-250
7. What is the current name of the LDAP synchronization technology used within the Symantec
Messaging Gateway?
A. Dynamic Data Cache
B. Directory Data Service
C. Active Directory
D. Domain Controller Interface (DCInterface)
Answer: B
Symantec examen ST0-250 examen certification ST0-250 ST0-250 examen certification ST0-250 ST0-250
8. If recipient validation is configured properly, which SMTP response level is given to messages
that fail recipient validation queries at connect time?
A. 3xx - Service unavailable
B. 4xx - Temporary delivery failure
C. 5xx - Permanent delivery failure
D. 6xx - Rejected validation failure
Answer: C
certification Symantec ST0-250 examen ST0-250 examen certification ST0-250
9. How should an administrator stop inbound mail using the command line interface (CLI)?
A. use mta-control
B. use mta-stop
C. use mail-control
D. use mail-stop
Answer: A
certification Symantec ST0-250 ST0-250
10. Which additional Email Reports Data collection must be enabled to track Top Probe Accounts
via reports?
A. Spam and Unwanted Mail
B. Submissions
C. Sender IP connections
D. Invalid Recipients
Answer: D
Symantec examen certification ST0-250 certification ST0-250 ST0-250 examen certification ST0-250
11. Which two statistics can the administrator view regarding the custom anti-spam rulesets?
(Select two.)
A. the "top-submitters" of missed spam or false positive detections
B. the "top submitters" of messages that are not valid and did not generate a custom rule
C. how many emails have been submitted for custom antispam rules
D. the effectiveness of the custom antispam rulesets compared to Symantec's rulesets
E. the top senders of messages detected by custon antispam rulesets
Answer: A,C
certification Symantec ST0-250 examen ST0-250 ST0-250 examen
12. What two actions can allowed end-users do to submit samples to Symantec and have custom
anti-spam rules created? (Select two.)
A. submit a sample to Symantec using the Email Submission Client
B. flag messages in their web-based SMG quarantine page as being spam and submitting the results
C. forward spam samples to abuse@symantec.com with a subject of "MISSED SPAM"
D. move the message into the included "Junk E-mail" folder available in Outlook
E. submit a sample to Symantec using the Email Submission Client available for Lotus Domino
Answer: A,B
Symantec examen certification ST0-250 ST0-250 examen ST0-250 examen ST0-250
13. A company uses multiple control centers. What must be done to ensure legitimate NDRs are
recognized by Bounce Attack Prevention across all scanners?
A. configure the same seed value on each control center
B. configure the same administrator email address across both control centers
C. configure the same seed value on each scanner
D. configure both control centers with the same internal email hosts
Answer: A
Symantec examen certification ST0-250 ST0-250 examen certification ST0-250
14. An organization would like to participate in the Symantec Probe Network without having to
manually create decoy email accounts. The organization wants to make sure that the addresses that
participate in the Symantec Probe Network are currently receiving email. Which directory data
source function should be enabled to help in this situation?
A. recipient validation
B. address resolution
C. SMTP authentication
D. LDAP routing
Answer: A
certification Symantec ST0-250 examen ST0-250 certification ST0-250
15. What is required before attempting installation of the Symantec Messaging Gateway 10.5
appliance?
A. console access to the appliance
B. DVD-ROM drive listed on hardware compatibility list
C. valid license file
D. machine account created in Active Directory
Answer: A
certification Symantec certification ST0-250 ST0-250
NO.3 Which directory data source function must be enabled to help prevent a directory harvest
attack?
A. Active Directory connector
B. Dynamic Data Sourcing
C. LDAP authentication
D. Recipient validation
Answer: D
Symantec examen ST0-250 examen ST0-250 examen
NO.4 Symantec Messaging Gateway 10.5 will be deployed to receive mail directly from the Internet.
In this situation, which option should be selected within the Inbound Mail Filtering - Accepted Hosts
step of the site setup wizard?
A. Enable MX lookup
B. Define a list of domains
C. Specify IP addresses/domains
D. Select all IP addresses
Answer: D
certification Symantec ST0-250 certification ST0-250 ST0-250 examen
NO.5 How does Symantec DLP communicate with Symantec Messaging Gateway (SMG) to indicate
what type of incident (if any) is related to a given message?
A. Symantec DLP uses the ICAP protocol to indicate if a message is clean,or if it violated any defined
policies.
B. Symantec DLP will add information into the message that can be interpreted by SMG and then
send it to SMG via SMTP .
C. Symantec DLP will quarantine messages that violate established policies,blocking it from SMG.
D. Symantec DLP will use TLS to send a notification message to the SMG server for any content
violations.
Answer: B
certification Symantec certification ST0-250 certification ST0-250
没有评论:
发表评论