HP meilleur examen HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42, questions et réponses

Finalement, la Q&A HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification HP, vous aurez un meilleur salaire et une plus grande space à se développer.

Si vous traviallez dur encore pour préparer le test de HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 sans aucune doute.

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Si vous faites toujours la lutte contre le test HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42. Si vous avez déjà décidé à s'améliorer via HP HP0-Y37 HP0-Y36 HP0-Y33 HP2-E23 HP0-P15 HP0-M42, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Code d'Examen: HP0-Y37

Nom d'Examen: HP (Migrating &Troubleshooting Enterprise Networks)

Questions et réponses: 104 Q&As

Code d'Examen: HP0-Y36

Nom d'Examen: HP (Deploying HP Enterprise Networks)

Questions et réponses: 73 Q&As

Code d'Examen: HP0-Y33

Nom d'Examen: HP (Implementing HP Wireless Networks)

Questions et réponses: 97 Q&As

Code d'Examen: HP2-E23

Nom d'Examen: HP (Technical Essentials of HP Enterprise Products)

Questions et réponses: 60 Q&As

Code d'Examen: HP0-P15

Nom d'Examen: HP (Planning & Designing HP Superdome 2 Solutions)

Questions et réponses: 59 Q&As

Code d'Examen: HP0-M42

Nom d'Examen: HP (HP Business Availability Center 8.x Software)

Questions et réponses: 68 Q&As

HP0-Y33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y33.html

NO.1 In your existing wireless network you have a variety of E-MSM controllers. Which products are capable
of supporting teaming? (Select two.)
A. E-MSM710
B. E-MSM730
C. E-MSM750
D. E-MSM760
E. E-MSM765zl
Answer: D,E

HP   certification HP0-Y33   HP0-Y33   HP0-Y33

NO.2 .What are the major benefits of creating a team of controllers? (Select two.)
A. controller redundancy
B. Flow support
C. local DHCP support
D. PPTP client and server support
E. single IP management of all team controllers
Answer: A,E

certification HP   HP0-Y33 examen   HP0-Y33 examen   certification HP0-Y33

NO.3 When Centralized Access Control is configured as Automatic, when is a user data tunnel created?
A. when more than one controller is on the network that has the same access control configuration
B. when tunnels are manually configured and available
C. when IPSec is set up between two controllers
D. when a synchronized AP and its controller are on different subnets
Answer: D

HP   HP0-Y33 examen   HP0-Y33   certification HP0-Y33

NO.4 What is the maximum number of E-MSM controllers that can be configured into a single team?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: E

HP examen   HP0-Y33   HP0-Y33   HP0-Y33   HP0-Y33   HP0-Y33

NO.5 An HP E-MSM760 Controller receives untagged traffic on its LAN port from a wireless client associated
with an access point from another manufacturer. In a WLAN configured with VSCs 1-4, which VSC will be
selected to pass this traffic?
A. VSC 2
B. VSC 3
C. VSC 4
D. default VSC
Answer: D

certification HP   HP0-Y33   certification HP0-Y33   certification HP0-Y33   HP0-Y33   certification HP0-Y33

NO.6 On a VSC, which Traffic Type options can be specified for egress VLANs? (Select three.)
A. default gateway traffic
B. IP filtered traffic
C. authenticated traffic
D. untagged traffic
E. intercepted traffic
F. unauthenticated traffic
Answer: C,E,F

certification HP   certification HP0-Y33   certification HP0-Y33

NO.7 When would the IP address of the Internet port on an MSM controller be set to "No Address"?
A. when NAT is enabled
B. when only authenticated traffic is passing through the Internet port
C. when NAT is disabled
D. when only VLAN traffic is passing through the Internet port
Answer: D

HP   HP0-Y33   certification HP0-Y33   HP0-Y33 examen

NO.8 which feature should you enable to enhance Layer 2 (L2) roaming?
A. seamless roaming
B. rapid authentication
C. WPA2 Opportunistic Key Caching
D. single network AP hopping
Answer: C

certification HP   HP0-Y33 examen   certification HP0-Y33

NO.9 Click the Exhibit button.
You have deployed a guest wireless service in the reception area of a marketing firm. The clients
associated with the guest service should be assigned to VLAN 10. When you test the configuration,
clients are being assigned IP addresses in the 192.168.0.0 subnet. You view the access controller
configuration shown in the exhibit.
Which command resolves the issue by correctly associating VLAN 10 with the appropriate interface.?
A. [sysname-wlan-st-1] port access vlan 10
B. [sysname-WLAN-ESS1] port access vlan 10
C. [sysname-GigabitEthernet1/0/1] port access vlan 10
D. [sysname-Vlan-interface10] port access vlan 10
Answer: B

HP examen   HP0-Y33 examen   HP0-Y33

NO.10 Your controller's Team Manager has suffered a catastrophic failure and an Interim Manager has been
selected. Which action is required to allow the Interim Manager to distribute a new software release to its
team members?
A. The Interim Manager is promoted to Team Manager status.
B. The Interim Manager is rebooted and reconfigured as the new Team Manager.
C. The Interim Manager promotes another team member to Team Manager and the new TeamManager
uploads the new software to the team members.
D. Each Team Member is manually upgraded from the Interim Manager.
Answer: A

HP   certification HP0-Y33   HP0-Y33

NO.11 A financial institution needs to deploy 80 access points in their new building. Since the institution is not
interested in purchasing additional wired switches for their LAN infrastructure, which solution should be
recommended to manage the access points?
A. HP A3000-24G-PoE+ Wireless Switch
B. HP A-WX5002 Access Controller
C. HP A-WX5004 Access Controller
D. HP A7500/E7900 Access Controller Module
Answer: C

certification HP   certification HP0-Y33   certification HP0-Y33   HP0-Y33 examen   certification HP0-Y33

NO.12 In the configuration of an E-MSM760 controller, you find that the default VSC is access controlled.
Which statements are true about an inbound packet on the LAN port which does not have a VLAN tag?
(Select two.)
A. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
B. The packet is associated with that VSC if the packet has a known SSID tag.
C. The packet is dropped as the LAN port will only accept VLAN tagged packets.
D. The packet is associated with the default VSC if it has no matching SSID tag.
E. The packet is dropped if the destination IP address is not the same as the MSM controllerIP address on
the LAN port.
Answer: B,D

certification HP   HP0-Y33   certification HP0-Y33   HP0-Y33 examen   HP0-Y33

NO.13 In order to create a new VLAN in an MSM controller configuration, which path should you take to
access the correct screen?
A. VSCs>[select a VSC]>VSC Profile
B. VSCs>VSC bindings>VLANs
C. Controller>Management>VLANs
D. Controller>Network>Ports
Answer: D

HP   HP0-Y33   HP0-Y33 examen   HP0-Y33

NO.14 After completing the configuration and synchronization of all team members, you discover through your
initial testing that your APs cannot associate with your team controllers. To solve this problem what should
you check?
A. that your VSC DHCP parameters are set correctly
B. that you have enabled your local DHCP server on your Team Manager (controller)
C. that an external DHCP server exists and is operational on your network
D. that DHCP Relay has been configured on all your team members (controllers)
Answer: C

HP examen   certification HP0-Y33   HP0-Y33

NO.15 When configuring the MSM controller for a controlled mode network, at which point is the AP's VSC
egress VLAN configured?
A. when the Group is created
B. when the AP is synchronized with its Group
C. when the specified VLAN is created
D. when the VSC is bound to the Group
Answer: D

certification HP   HP0-Y33   certification HP0-Y33   HP0-Y33