Vous allez choisir Pass4Test après essayer une partie de Q&A BICSI RCDD (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification BICSI RCDD.
Le programme de formation BICSI RCDD offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test BICSI RCDD.
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A BICSI RCDD de Pass4Test.
Code d'Examen: RCDD
Nom d'Examen: BICSI (Registered Communications Distribution Designer )
Questions et réponses: 106 Q&As
RCDD Démo gratuit à télécharger: http://www.pass4test.fr/RCDD.html
NO.1 A product is listed after it successfully completes a series of which of the following
test?
A. Mechanical
B. Regulatory codes
C. Electrical
D. Thermal
Answer: ACD
BICSI certification RCDD RCDD examen RCDD examen
NO.2 ________is the total opposition (resistance, capacitance, and inductance) a circuit,
cable, or component offers to the flow of alternating current.
A unit of measure expressed in ohms.
Answer: Impedance
BICSI RCDD certification RCDD RCDD certification RCDD RCDD examen
NO.3 A "wye" is a power system in which only one point is grounded.
A. False
B. True
Answer: B
BICSI RCDD certification RCDD
NO.4 Which of the following is the Standard for the Installation of Lightning Protection
Systems?
A. NFPA-780
B. NFPA-70
C. NFPA-72
D. NFPA-75
Answer: A
BICSI certification RCDD RCDD examen certification RCDD
NO.5 In an "underfloor duct system", the distribution ducts carry cables from the TR to
the feeder ducts.
A. False
B. True
Answer: A
certification BICSI RCDD RCDD
NO.6 NRZ is the acronym for which of the following?
A. Non-return to zero.
B. Nominal return zone.
C. Network registration zone.
D. Normal return zone.
Answer: A
BICSI certification RCDD certification RCDD RCDD examen
NO.7 Which of the following should be used as a guideline for estimating space
requirements of optical fiber and coaxial cable cross-connections in a TR?
A. 3 sq. in. for each fiber pair to be patched or cross-connected.
B. 2 sq. in. for each fiber pair to be patched or cross-connected.
C. 4 sq. in. for each fiber pair to be patched or cross-connected.
D. 1 sq. in. for each fiber pair to be patched or cross-connected.
Answer: B
BICSI examen RCDD certification RCDD RCDD examen RCDD
NO.8 For design purposes, which of the following would be the typical size range of a
4-pair 100 ohm UTP or ScTP (FTP) cable?
A. .50 in to .75 in
B. .14 in to .25 in
C. .31 in to .43 in
D. .11 in to .18 in
Answer: B
BICSI certification RCDD certification RCDD certification RCDD RCDD RCDD examen
NO.9 Which of the following is the Cable Modem (Cable-TV) Working Group?
A. IEEE 802.9
B. IEEE 802.11
C. IEEE 802.14
D. IEEE 802.3
Answer: C
BICSI examen certification RCDD certification RCDD
NO.10 ANSI/TIA/EIA-758 is the standard for which of the following?
A. Customer-Owned Outside Plant Telecommunications Cabling Standard.
B. Technical Specifications for 100 Ohm Screened Twisted Pair Cabling.
C. Propagation Delay and Delay Skew Specifications for 100-Ohm 4-Pair Cable.
D. Residential Telecommunications Cabling Standard.
Answer: A
BICSI RCDD examen RCDD
NO.11 The ability of a device, equipment, or system to perform without degradation in the
presence of an electromagnetic disturbance is called what?
A. Electromagnetic immunity.
B. Electromagnetic compatibility.
C. Electromagnetic induction.
D. Electromagnetic disturbance.
Answer: A
certification BICSI RCDD examen RCDD RCDD
NO.12 The inadvertent transposition of two conductors of separate pairs is called what?
A. Twisted pair
B. Transposed pairs
C. Reversed pair
D. Split pair
Answer: D
BICSI certification RCDD RCDD examen certification RCDD certification RCDD
NO.13 Between the late 60's and until 1984, what was the service that was to help architects
and engineers better design and implement pathways and spaces in commercial
buildings for telephone communications?
A. BICS
B. AT&T
C. CREDFACS
D. GTE
E. BICSI
Answer: A
certification BICSI RCDD RCDD RCDD examen RCDD examen
NO.14 In buildings that will contain the telecommunications systems, NEC requirements
address the adequate electrical environment for reliable and error-free operation of
the installed equipment.
A. False
B. True
Answer: A
BICSI RCDD RCDD certification RCDD
NO.15 In what year was the TIA formed?
A. 1985
B. 1965
C. 1958
D. 1956
Answer: A
BICSI examen RCDD RCDD RCDD
NO.16 Which of the following is the international standard for premises cabling?
A. ISO/IEC 18010
B. ISO/IEC 11801
Answer: B
BICSI certification RCDD RCDD examen
NO.17 The CEC is revised every four years.
A. True
B. False
Answer: A
BICSI certification RCDD certification RCDD RCDD
NO.18 What is the standard floor space allocation used in an office environment for one
individual work area?
A. 100 square feet.
B. 50 square feet.
C. 150 square feet.
D. 75 square feet.
Answer: A
BICSI certification RCDD certification RCDD certification RCDD RCDD
NO.19 Distribution cable is that part of the loop that connects the customer location to the
customer feeder cable.
A. True
B. False
Answer: A
BICSI RCDD RCDD RCDD examen certification RCDD RCDD examen
NO.20 Which of the following is the standard for "Recommended Practice for Installation
Design and Installation of Valve Regulated Lead-Acid Storage Batteries for
Stationary Applications"?
A. ANSI/IEEE C62.41
B. ANSI/IEEE C62.45
C. ANSI/IEEE P1188-1996
D. ANSI/IEEE P1187-1996
Answer: D
certification BICSI certification RCDD RCDD certification RCDD RCDD
没有评论:
发表评论