Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification SNIA S10-300. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Le test certification SNIA S10-300 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat SNIA S10-300 puisse augmenter la compétition dans ce marché.
Code d'Examen: S10-300
Nom d'Examen: SNIA (Snia Storage Architect-Assessment,Planning and Design)
Questions et réponses: 85 Q&As
Pass4Test peut offrir la facilité aux candidats qui préparent le test SNIA S10-300. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A SNIA S10-300 selon le résumé de test réel SNIA S10-300. Vous pouvez réussir le test à la première fois sans aucune doute.
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification SNIA S10-300. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat SNIA S10-300. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test SNIA S10-300. Choisir le produit de Pass4Test particulier pour le test Certification SNIA S10-300 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
S10-300 Démo gratuit à télécharger: http://www.pass4test.fr/S10-300.html
NO.1 What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C
certification SNIA S10-300 certification S10-300 S10-300
NO.2 A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a
solution designed which allows access from 32 servers with no single point of failure. Which number of
HBAs and the associated throughput, provide server access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C
certification SNIA S10-300 certification S10-300 S10-300 S10-300 examen
NO.3 A customer is using host based virtualization to mirror critical data between two vendors disk arrays.
Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: CD
certification SNIA certification S10-300 S10-300 certification S10-300 S10-300
NO.4 You have been tasked with identifying upgrade options for your networked storage. Which two should
you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Answer: CD
certification SNIA certification S10-300 S10-300 S10-300 examen S10-300 examen
NO.5 When planning a NAS solution, which two sub-processes are associated with NAS Service Capacity
Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: BC
SNIA certification S10-300 S10-300 examen certification S10-300
NO.6 When implementing a high performance NAS solution you must check for which two items? (Choose
two.)
A. Ensure the network is full duplex.
B. Ensure that hosts have 100Mb NICs.
C. Ensure the network is at least 100Mb.
D. Ensure routers are configured for OSPF.
Answer: AC
SNIA S10-300 examen S10-300 certification S10-300
NO.7 What are three key advantages of deploying a director-based solution over a mesh of switches?
(Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: BCE
SNIA S10-300 examen S10-300 S10-300
NO.8 What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning cycle, e.g. the
financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the estimated demand over
the period of the planning horizon.
Answer: C
SNIA certification S10-300 S10-300 examen S10-300 examen
NO.9 Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each server port
requires 80 MB/s of one-way bandwidth, spread out evenly among the storage devices. The customer
would like to add 28 server ports along with 28 disk ports. Each server will evenly distribute its traffic on
each disk. Using 16 port 1 Gb switches, which topology should you select to minimize the number of
switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C
SNIA certification S10-300 certification S10-300 S10-300
NO.10 A customer has a terabyte database and is required to back up the data daily. The SLA has allotted 6
hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the customer has a tape
library with only five SDLT tape devices running at native speeds of 40 GB/hour. Which two should you do
to successfully meet the expected SLA requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: AC
SNIA S10-300 examen certification S10-300 S10-300
Le test SNIA S10-300 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test SNIA S10-300 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat SNIA S10-300 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test SNIA S10-300 avec l'aide de Pass4Test.
没有评论:
发表评论