2014年3月2日星期日

JN0-643 dernières questions d'examen certification Juniper et réponses publiés

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Juniper JN0-643. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Bien qu'il ne soit pas facile à réussir le test Juniper JN0-643, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Juniper JN0-643, mais encore à vous aider d'économiser votre temps.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Juniper JN0-643, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Juniper JN0-643 coûtant un peu d'argent.

Code d'Examen: JN0-643
Nom d'Examen: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
Questions et réponses: 201 Q&As

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Juniper JN0-643 et passer le test à la première fois.

Le test Juniper JN0-643 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Juniper JN0-643 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Juniper JN0-643.

JN0-643 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-643.html

NO.1 A company is deploying a new 802.1X port-based security infrastructure to allow users to
access resources through wired Ethernet ports. However they recently deployed an RSA
token-based system for users to connect remotely. The network administrator wants to reuse the
same security database for 802.1X port-based security.
Which 802.1X authentication protocol is required?
A. EAP-TLS
B. LAN-PEAP
C. RSA-EAP
D. EAP-TTLS
Answer: D

Juniper   certification JN0-643   JN0-643 examen   JN0-643

NO.2 You have been asked to implement a private VLAN with two community VLANs.
This private VLAN will be confined to a single switch in your Layer 2 network.
This private VLAN, along with other VLANs configured on the switch, will require gateway services
provided through a connected router.
Which statement about this deployment is true?
A. All isolated ports must be configured as trunk ports.
B. A minimum of one promiscuous trunk port is required.
C. Both community VLANs must have an assigned VLAN IDs.
D. A minimum of one private VLAN trunk port is required.
Answer: B

Juniper examen   JN0-643 examen   certification JN0-643

NO.3 Voice traffic is coming in on UDP port 17689. This traffic must be classified into the
expedited-forwarding forwarding class.
Which type of classifier is needed?
A. code point alias
B. rewrite marker
C. multifield
D. behavior aggregate
Answer: C

Juniper examen   JN0-643   certification JN0-643   certification JN0-643

NO.4 You have implemented 802.1X authentication in your Layer 2 network and you have only a
single RADIUS server. You are asked to ensure that if the RADIUS server becomes unreachable or
fails, users connected to the ge-0/ 0/ 0 port are still able to reach the Internet using a predefined
guest VLAN.
Which command allows this access?
A. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 radius-fail vlan guest
B. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 server-fail vlan-name guest
C. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 auth-fail assign-vlan guest
D. [edit]
user@switch# set protocols dot1x authenticator interface ge-0/ 0/ 0.0 radius-fail assign guest
Answer: B

Juniper examen   JN0-643 examen   JN0-643 examen

NO.5 Which option is a valid IPv6 multicast address?
A. fe80::205:8640:471:3200/ 64
B. ::172.16.0.5 /126
C. ff03:365:ba::23
D. ff01:cgfc:345:22::226:8ff:fee4:bf6f
Answer: C

Juniper examen   JN0-643   JN0-643 examen

NO.6 A Layer 2 forwarding loop occurred on your network during a scheduled maintenance period.
You must prevent this behavior in the future.
Which protocol should you enable on the EX Series switch to address this condition in the future?
A. DVMRP
B. L2TPv3
C. STP
D. RSVP
Answer: C

Juniper   JN0-643   JN0-643   JN0-643   JN0-643

NO.7 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).
Which Junos command can help verify connectivity in the network?
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: C

Juniper   JN0-643 examen   certification JN0-643   certification JN0-643

NO.8 Which protocol reachability is advertised by OSPFv2?
A. IPv4
B. IPv5
C. IPv6
D. ISO
Answer: A

Juniper   certification JN0-643   certification JN0-643   JN0-643 examen   certification JN0-643

NO.9 You must configure your access switch with more than 3000 VLANs and you want the ability
to load-balance across them.
Which spanning-tree approach has the least impact on control-plane performance?
A. Configure your access switch with a load-balancing policy and apply it under [edit protocols rstp].
B. Configure your access switch for Rapid-PVST+.
C. Configure your access switch for MSTP , incorporating the use of MSTIs.
D. Configure your access switch for both VSTP and RSTP .
Answer: C

Juniper   JN0-643   JN0-643   certification JN0-643

NO.10 Port authentication falls back to Captive Portal.
In which two scenarios would the port authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper examen   JN0-643 examen   JN0-643   JN0-643

NO.11 You are AS 6573.
Which AS path regular expression matches only routes originated in your AS?
A. "6573.*"
B. ".*"
C. "{"
D. "

没有评论:

发表评论