Pass4Test offre de Avaya 6102 matériaux d'essai

Vous allez choisir Pass4Test après essayer une partie de Q&A Avaya 6102 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Avaya 6102.

Le produit de Pass4Test peut assurer les candidats à réussir le test Avaya 6102 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Si vous traviallez dur encore pour préparer le test de Avaya 6102 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Avaya 6102.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Code d'Examen: 6102
Nom d'Examen: Avaya (Avaya Virtual Services Platform 9000 Implementation Exam)
Questions et réponses: 67 Q&As

6102 Démo gratuit à télécharger: http://www.pass4test.fr/6102.html

NO.1 Simple Loop Prevention Protocol (SLPP) provides active protection against layer 2 network
loops on a per-VLAN basis. For the SLPP Tx process, the network administrator decides on which
VLANs to enable SLPP. The hello packets are then replicated out all ports that are members of
the SLPP-enabled VLAN. Given the following information:
A = InterSwitch Trunk (IST)
B = Split MultiLink Trunk (SMLT)
#1 VSP 9000
#2 VSP 9000
#3 ERS 4500
When setting up the SLPP Rx process, which configuration role is setup on VSP #1
A. The VSP #1 Rx process is enabled on all VLANs to monitor for the VSP #3 SLPP packets.
B. The VSP # 1 Rx process is enabled on port 3/1 and the IST ports to monitor for the VSP #2
SLPP packets.
C. The VSP #1 Rx process is enabled on all SMLT VLANs to monitor for the VSP #2 SLPP
packets.
D. The VSP #1 Rx process is enabled on port 3/1 to monitor for the VSP #2 SLPP packets.
Answer: D

Avaya   6102   6102 examen   certification 6102

NO.2 A Virtual Services Platform (VSP) 9000 chassis will need to terminate the following
connections:
four 10GbE: 10GBaseER core connections in a redundant DMLT configuration 80 GbE
1000BaseLX single uplink connections to the edge stackable switches two Copper 1000BaseT
connections to a couple of directly attached IDS appliances
The 10GbE core connections must ensure non-blocking performance.
Which hardware configuration is the most cost effective and meets the above requirements?
A. Install two 9024XL cards, two 9048GB cards, one 9048GB card.
B. Install two 9024XL cards, two 9048GB cards.
C. Install two 9024XL cards, one 9048GB card, one 9048GT card.
D. Install three 9024XL cards.
Answer: C

Avaya examen   6102   6102 examen

NO.3 Which three are secure protocols that Virtual Services Platform (VSP) 9000 supports? (Choose
three)
A. SNMPv3
B. HTTPS
C. FTP
D. SNMPv2
E. SSH
Answer: A,B,E

certification Avaya   6102   6102

NO.4 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to ensure that
all of the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF
redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D

certification Avaya   6102   6102   6102 examen

NO.5 In the current business environment everyone is being asked to do more with fewer physical
resources. Using visualization allows the Virtual Services Platform (VSP) 9000 to initiate the services
provided.By using VRF-Lite, what does the VSP 9000 eliminate the need for?
A. SMLT
B. RSMLT
C. Non-overlapping addresses
D. Multiple physical router
Answer: D

Avaya examen   certification 6102   6102   6102 examen   6102

NO.6 A technician has enabled VLACP on the IST connection, and wants, to verify that is operating
properly. When using the show vlacp interface command, what is the timeout value for the IST
connection?
A. short
B. 3,000
C. 500
D. slow
E. long
Answer: E

certification Avaya   certification 6102   6102   6102 examen   6102 examen

NO.7 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the
existing Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the VSP
9000. Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP address.
Answer: D

Avaya   6102 examen   certification 6102   6102   certification 6102

NO.8 The Chassis Area Network (CAN) uses the SERDES to connect which modules in the Virtual
Services Platform (VSP) 9000?
A. Switch Fabric cards and I/O cards
B. CP curds and Switch Fabric cards
C. CP cards and Switch Fabrics in slots 1 & 4
D. All 10 I/O cards, six SF cards and two CP cards
E. CP cards and all I/O cards
Answer: A

Avaya   6102   6102 examen   6102

NO.9 Which statement about the local router MAC addresses on RSMLT aggregation switches
(cluster)
is true?
A. On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and only
used in case of switch failure.
B. On a RSMLT aggregation switch pair, local router MAC addresses are exchanged, and used for
data forwarding.
C. On a RSMLT aggregation switch pair, local virtual MAC addresses is exchanged, and used for
data forwarding.
D. RSMLT aggregation switches are not exchanging local router MAC addresses, but are using
the IP destination address to forward traffic.
Answer: B

certification Avaya   certification 6102   6102 examen   6102

NO.10 Flight Recorder can be used on the Virtual Services Platform (VSP) 9000 to help identify
problems. When can a Flight Recorder snapshot be taken?
A. When the VSP has to be booted into the diagnostic mode
B. Only after a warning message is logged
C. Anytime
D. Every hour
Answer: C

Avaya   certification 6102   certification 6102   certification 6102

Bien qu'il ne soit pas facile à réussir le test Avaya 6102, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test Avaya 6102, mais encore à vous aider d'économiser votre temps.